1. The mold glue must be stirred evenly before use to ensure the best performance of the product.

2. The mold should be cleaned and smoothed before using the mold glue to ensure the best mold release performance.

3. When using the mold silicone, please add our company's matching 201 silicone oil according to the needs, the amount is 5-15%. Too little addition of silicone oil may affect the operation and defoaming function. Too much addition may affect the product's tear resistance, tensile strength and heat resistance. performance.

4. Please cover the mold glue tightly after use to prevent its water from over-evaporating and affecting the curing performance.

5. Be sure to prevent impurities and water from mixing when using the mold glue, otherwise its performance may be affected.

6. It is recommended that the mold silicone rubber reinforced cloth used by the company be added when using the mold silicone rubber, which can greatly improve the service life of the silicone mold.

7. Please strictly control the amount of silicone rubber hardener added to the mold. Do not pull the seedlings to promote it. Blindly increase the amount, which will seriously affect the life of the mold.

8. Please leave it for 24 hours after the mold is made, otherwise it will reduce the service life of the mold.

模具 During the product manufacturing process, the production of molds plays an important role and accounts for a significant proportion of product costs. The mold silicone (mold rubber, mold silicone rubber, silicone rubber) is the most important raw material for making molds. The quality and service life of each mold is directly related to the company's cost and the stability and reliability of each link in the operation process Sex. Therefore, the silicone rubber raw materials occupy a certain proportion of the cost of the entire company, which plays a key role in the development of the process plant.

The molded mold can be used for cultural stone, European-style building components, sandstone crafts, resin crafts, various sculptures, copper reliefs, glass steel products, flower pots, and polyurethane, polyester, plastic, plastic, epoxy resin, paraffin, plaster, Production of materials such as cement and low melting point alloys.